Quarterly Activities and Cashflow Report
Released
Released
Announcement PDF
Quarterly Report – 30th June 2023
HIGHLIGHTS
Australia – Copper, Zinc, Nickel, Gold
❑
Widespread highly prospective host rocks for Broken Hill Type (BHT) mineralisation
confirmed by the reconnaissance diamond drilling program (10 holes for 3,677m) at the
Balladonia Project in WA’s Fraser Range region, which is under the Strategic Alliance
Agreement (SAA) with South32.
❑
A potential ‘lode horizon’ defined by elevated levels of zinc, lead, cadmium and tin was
intersected at the Tea Tree Prospect (Balladonia) providing encouragement and focus for
ongoing exploration. Assay results for seven of the ten holes drilled are still pending.
❑
At the Morrisey Project in WA, modelling of gravity and magnetic data highlighted
additional targets for magnetite mineralisation similar to that intersected at the Waterfall
Prospect. Drilling is being considered under the SAA.
❑
Modelling of magnetic / gravity data at the Moora Project indicates the strongly magnetic
rocks targeted in the Latham Intrusion (with possible similarities to the Julimar Intrusion)
were not intersected by the initial drill program. Further exploration is being planned.
❑
Planning for the upcoming drill program at the Jubilee Lake Nickel-Copper-PGE Project
(WA) continued, with heritage clearance obtained. Drilling is now planned to commence
late in Q3 2023.
Peru – Copper-Gold
❑
Permitting to allow drilling to commence at the Cangallo Porphyry Copper Prospect was
advanced, with permits now expected to be received within the next 2-3 months.
❑
Geological mapping at Pirata Project (Target 7) located copper mineralisation at surface
within veined volcanics adjacent to large areas of advanced argillic alteration (lithocap),
supporting the concept of nearby porphyry copper mineralisation.
❑
A detailed review of results from the earlier Cerro de Fierro drilling program highlighted
the potential for IOCG mineralisation within structural targets not tested by the original
wide-spaced drilling program. New drill permit applications were submitted.
Corporate
❑
The Company’s Quarter-end cash position was ~$3.7 million.
Figure 1: Project Locations – Australia and Peru.
OVERVIEW
During the June Quarter, drilling activity was
focused on the Balladonia Project in WA,
with Government permits for further drilling
in Peru also being advanced.
In Australia, the reconnaissance diamond
drilling program at Balladonia was
successfully completed and cultural heritage
clearance was obtained to allow drilling to
commence at the Jubilee Lake Nickel
Prospect. Interpretation of geophysical survey
results over the Moora and Morrisey Projects
was completed to identify further targets for
future drilling. All of these projects are under
the Strategic Alliance Agreement (SAA) with
a wholly-owned subsidiary of South32
Limited (South32).
In Peru, permit applications for drilling at
Cangallo and Cerro de Fierro were submitted.
Geological mapping and sampling were
completed over Target 7 at Pirata, supporting
the potential for nearby porphyry copper
mineralisation. The Cerro de Fierro Project is
now 100% AusQuest ownership.
AUSTRALIA – GOLD and BASE METAL
PROJECTS (Copper, Nickel, Zinc)
Balladonia Nickel-Copper Project (100%
AQD, subject to SAA)
The Balladonia Project is located ~50km
south of the Nova–Bollinger nickel-copper
deposit. It consists of seven Exploration
Licences (five granted and two applications)
covering an area of ~840km² and is located
within a structurally complex region of the
Fraser Range Terrane. It is centred above the
southern margin of a deep regional gravity
anomaly (~30 milligals), which is thought to
reflect buried mafic/ultramafic rocks that may
be similar to those related to the formation of
the Nova deposit. Comparisons with the
Eastern Succession in north-west Queensland
(east of Mt Isa), where iron-oxide coppergold (IOCG) and Broken Hill Type (BHT)
deposits are known to occur, are becoming
more apparent. Many of the tenements lie
within the Dundas Reserve. Exploration work
at Balladonia is funded under the SAA.
During the Quarter, a reconnaissance diamond
drilling program (10 holes for 3,677m)
designed to provide an initial test of seven
Broken Hill Type (BHT) geophysical targets
was successfully completed (ASX release 24
July 2023). Drilling included additional drillholes (three holes for 1,411m) at the Tea Tree
Prospect, where previous drill results had
indicated the presence of highly prospective
BHT host rocks (Figure 2).
Initial assay data have now been received
from the Tea Tree Prospect (three drill-holes)
with final assays for the remaining six targets
expected before the end of August.
Figure 2: Detailed magnetic and gravity surveys showing the location of drill-holes.
The targets tested were defined by a
combination of detailed gravity and magnetic
surveys which outlined strong anomalies
indicative of prospective host stratigraphy and
potential base metal mineralisation similar to
that found in the Cloncurry Region of NW
Queensland (host to the Cannington deposit)
and the Broken Hill area of NSW.
At the Tea Tree Prospect, drilling along strike
and beneath the initial drilled section
intersected prospective host rocks as defined
by the presence of banded iron formations
(BIF’s) and garnetiferous quartzites.
Preliminary interpretation of the assay data
from drill-holes 23BDDD018, 019 and 020
outlined a potential ‘lode horizon’ (~50m
thick) within the prospective host stratigraphy
containing elevated values of lead (up to
507ppm Pb), zinc (up to 1,258ppm Zn),
cadmium (up to 32ppm Cd) and tin (up to
20ppm Sn) (Figure 3).
The inferred lode horizon – which could
contain high-grade base metal mineralisation
along its strike length – is interpreted to
extend well beyond the limits of the current
drill coverage (possibly for kilometres), based
on interpretation of the aeromagnetic and
gravity data. This provides a strong focus for
ongoing exploration for BHT mineralisation
in the area.
Assay data for drill-holes 23BDDD023 and
024 at the Halfway Prospect, 23BDDD021 at
Tea Tree North and 23BDDD027 at
Telegraph West are still pending. Significant
amounts of BIF stratigraphy were intersected
within all these holes, suggesting similarities
with the Tea Tree Prospect and potential for
prospective host rocks for BHT mineralisation
to be widespread within the tenements.
At
Telegraph
East,
drilling
(holes
23BDDD025 and 026) intersected a gabbroic
(+/- pyroxenite) rock with possible
carbonatite affinities that may be related to
the carbonatite intrusion intersected at the
Telegraph Prospect, located ~5km to the west
(ASX release 1 April 2020).
Drilling at the Halfway South Prospect (drillhole 23BDDD022) also intersected possible
carbonatitic rocks, suggesting that they may
be more widespread throughout the area than
envisaged. Carbonatites can be a source of
rare earth metals as well as base metal
mineralisation.
A more complete assessment of the potential
for carbonatites and associated metals will be
undertaken once all assay data are available.
Morrisey Magnetite, Nickel-Copper-PGE
Project (100% AQD, subject to SAA)
The Morrisey Project is located ~500km north
of Perth in Western Australia within the
Narryer Terrane, which forms the northwestern margin of the Yilgarn Craton. It
consists of four granted Exploration Licences
(ELs) covering an area of ~1,000km² parallel
to the Yilgarn Craton boundary. The area
became the focus of industry attention
following the discovery by Chalice Mining of
the Julimar nickel-copper-PGE deposit north
of Perth, which highlighted the untested
nickel-copper-PGE potential of the margin of
the Western Yilgarn Craton. Recent drilling
by the Company also highlighted potential for
magnetite mineralisation within the project.
Exploration work at Morrisey is funded under
the SAA.
During the Quarter, computer modelling of
gravity and magnetic data was undertaken to
prioritise targets for future drilling, following
encouraging results from the Company’s
initial Reverse Circulation (RC) drilling
program which highlighted potential for highgrade magnetite in the area as well as possible
nickel-copper and PGE mineralisation.
Test results from samples at the Waterfall and
Sandfly Prospects showed that the coarsegrained magnetite intersected by drilling was
upgradable (Davis Tube – magnetic
separation) to a premium product (Fe >71%)
using a relatively coarse grind size (ASX
release 24 January 2023).
3D modelling of gravity and magnetic data
collected over the Waterfall Prospect shows
relatively good correlation between the two
datasets, outlining a causative body with
possible dimensions of ~800m x 200m
(Figure 4).
Drill-hole 22MYRC001 which intersected the
magnetite mineralisation, occurs on the
northern margin of the inferred magnetite
body which appears to thicken and shallow to
the south-west. Further drilling at the
Waterfall Prospect is being considered under
the SAA to determine potential size, grade
and depth of the magnetite occurrence.
Figure 4: Magnetic and gravity models showing location of drilling and potential outline of magnetite body
Modelling of gravity and magnetic data over
similar
geophysical
targets
scattered
throughout the tenements was also completed,
with strong correlations between magnetic
and gravity models at each of the prospects
suggesting excellent potential for additional
magnetite mineralisation to be found within
the area.
Results from a regional soil sampling
program (~1,440 samples), designed to search
for clusters of lithium-bearing pegmatites
within an interpreted regional shear zone,
identified at least four areas where in-fill
sampling and mapping is required to confirm
anomalism and define possible targets for
follow-up.
The sample spacing of 800m x 100m is
regional in nature and was used as a first-pass
guide to identify potential areas of interest in
an area where outcrop is very limited.
Lithium (Li), caesium (Cs) and tantalum (Ta)
values were ratioed against zircon (Zr) to
account for background variations due to
lithology and regolith changes in order to
identify anomalies for follow-up (Figure 5).
In-fill sampling and reconnaissance mapping
is planned for Q3 2023.
Figure 5: Morrisey soil sampling program showing sample locations and areas for follow-up
Jubilee Lake Nickel-Copper-PGE Project
(100% AQD, subject to SAA)
The Jubilee Lake Project is located ~500km
east of Kalgoorlie in Western Australia,
within the northern portion of the Eucla
Basin. It consists of one granted Exploration
Licence (EL) and five EL applications
covering a total area of ~3,200km². The
Project is situated within a large flood basalt
terrane close to the south-eastern margin of
the Yilgarn Craton and is centred over the
Rodona Shear, which shows strong evidence
as being the key feeder structure to the
surrounding flood basalts. Mafic/ultramafic
intrusions associated with feeder structures to
flood basalt terranes are considered prime
targets for Ni-Cu-PGE sulphide deposits,
similar to those found at the giant Norilsk
deposits in Russia, and more locally at NeboBabel (Oz Minerals) and possibly at NovaBollinger (IGO), both nearby deposits.
Exploration work at Jubilee is funded under
the SAA.
During the Quarter, Native Title Heritage
clearance was obtained over planned access
and a deep diamond drill-hole sited to test a
strong EM target located below the
interpreted flood basalts. This target is located
adjacent to the Rodona Shear, which is
thought to represent a major deep-seated
feeder structure responsible for at least part of
the extensive outpouring of flood basalts in
the area.
A drilling contract is currently being finalised
with drilling expected to commence late in Q3
2023 to determine the potential for Norilsk
style nickel-copper-PGE mineralisation in this
area.
Moora Nickel-Copper Project (100% AQD,
subject to SAA)
The Moora Project is located ~150km north
of Perth, Western Australia, within the
Jimperding Metamorphic Belt, which forms
the south-western margin to the Yilgarn
Craton. It consists of three Exploration
Licences and covers an area of ~440km². The
area became the focus of industry attention
following the discovery by Chalice Mining of
the Julimar nickel-copper-PGE deposit north
of Perth, which highlighted the untested
nickel-copper-PGE potential of the margin of
the Western Yilgarn Craton. Exploration
work at Moora is funded under the SAA.
During the Quarter, computer modelling of
magnetic and gravity data over the Latham
Intrusion was completed using physical
property measurements obtained from the
wide-spaced RC drilling (four holes) program
for control (ASX release 24 April 2023). The
initial drilling program was designed to test
for fertile mafic-ultramafic host rocks similar
to those found within the Gonneville Intrusion
which
hosts
the
nickel-copper-PGE
mineralisation at Julimar.
Results of the modelling indicate that more
strongly magnetic rock types than those
intersected by the initial drilling program
(ferro gabbros with magnetic susceptibilities
of ~0.04 SI units) must be present within the
intrusion to explain the amplitude of the
observed magnetic response. No strongly
magnetic rocks were intersected by the initial
program.
Fertile host rocks for Ni-Cu-PGEs within the
Gonneville Intrusion are known to be strongly
magnetic, suggesting that stronger magnetic
units within the Latham intrusion should be
priority targets for Ni-Cu-PGE exploration.
Modelling also suggests that areas beneath the
ferro-gabbro unit and/or close to the western
and southern contact zones are the most likely
places to locate the strongly magnetic units
within the intrusion. The basal contact
appears to dip either to the north or east with
flatter dips associated with the southern
contact zone (Figure 6). Further testing of
these locations is being planned.
Figure 6: Latham Prospect: detailed magnetic and gravity images showing prospective contacts
Hamilton Copper-Gold Project:
The Hamilton Project is located in north-west
Queensland, ~120km south of the world-class
Cannington mine and ~70km south of the
Osborne copper mine. It consists of two
Exploration Licences covering an area of
~520km². Exploration is targeting iron oxide,
copper, gold (IOCG) and Broken Hill Type
(BHT) mineralisation beneath the extensive
cover in the region. Limited historical drilling
designed to test magnetic and gravity targets
provided evidence for “near-miss” situations
which are the focus of the Company’s
exploration programs.
A review of the Company’s drilling database
was initiated to identify possible near-miss
opportunities that may be of interest to other
parties, before deciding on further work
programs for the project.
Mt Davis Lead-Zinc-Copper Project:
The Mt Davis Project is located ~180km NNE
of Wiluna, Western Australia, along the
northern margin of the Earaheedy Basin. It
consists of two Exploration Licences and
covers an area of ~750km². The project was
acquired following the discovery of extensive
zinc and copper mineralisation by Rumble
Resources at its Chinook Prospect, located on
the southern side of the Basin, where
mineralisation is stratigraphically controlled
and located below the Frere Iron Formation.
The Mt Davis tenements are believed to
contain similar stratigraphy but in an area of
greater structural complexity which has been
reported as an important factor in the
localisation of higher grades at Chinook.
No further progress was made on this project
during the Quarter due to other higher priority
activities. Heritage surveys need to be
completed before any planned shallow aircore drilling program can commence.
New Opportunities (Australia):
The proposed gravity survey that covers the
Coober Pedy IOCG Project in South Australia
has not been initiated due to higher priority
activities elsewhere.
PERU COPPER-GOLD PROJECTS
AusQuest has assembled a strong portfolio of
copper-gold prospects along the southern
coastal belt of Peru in South America, with
numerous targets identified for drilling as
possible porphyry copper and/or replacement
style (manto) IOCG targets with the size
potential being of significance to AusQuest
(Figure 7). Peru is one of the world’s most
prominent destinations for copper exploration
and is considered a prime location for worldclass exploration opportunities.
Figure 7: Project Locations – Southern Peru.
Cerro de Fierro Copper Project:
The Cerro de Fierro Project (CDF) is located
at the southern end of a recognised IOCG
metallogenic belt in southern Peru. It lies
within ~150km of the Mina Justa deposit
(~475Mt @ 0.68% Cu), which is being
developed by the Marcobre Joint Venture.
Surface indicators of porphyry copper
mineralisation have been identified within the
Pirata Project area approximately 5km due
east of CDF, associated with a major E-W
structure that is considered to be a priority
target zone within the coastal belt of southern
Peru.
Late in the Quarter, the Cerro de Fierro
Project was returned 100% to AusQuest with
South32 electing to convert their earn-in
position (having spent in excess of US$7.0M)
to a 1% net smelter returns royalty. A review
of the Project’s extensive database was
initiated to identify key ‘drill-ready’ targets
and possible ‘unexplored areas’ that were not
originally tested by drilling due to potential
resource economic requirements imposed
under the SAA. The search for a new joint
venture partner has been initiated with several
parties expressing interest.
Geological mapping over Pirata Target 7
confirmed the presence of advanced argillic
alteration (AAA) within a dominantly
andesitic volcanic sequence as well as
locating further evidence of copper at surface
within veined volcanics (Figure 8).
The copper at surface appears to occur
marginal to the areas of mapped AAA
(lithocap), suggesting that the exposed
mineralisation may be reflecting the margins
of a porphyry system. The wide-spread nature
of the copper anomalism is believed to imply
potential for a sizeable system. Further
detailed mapping and possible trenching is
planned to optimise potential sites for drilling.
The highly anomalous copper values reported
from surface samples at this prospect (see
Quarterly Report to ASX - March 2023) are
considered to be a strong indicator for a
mineralised porphyry nearby.
Figure 8: Pirata Target 7 geology showing outline of the lithocap and copper anomalies
A review of the Company’s historical drilling
data testing a manto-style Iron-Oxide Copper-
Gold (IOCG) target located west of Pirata,
was initiated by the Company’s consultants.
This work identified key areas where drilling
failed to test for structurally controlled
mineralisation along strike from drill-hole
CDFDD003, which intersected several
intervals (~30m thick) of copper-gold
mineralisation grading ~0.4% Cu and 0.2gpt
Au (*historical reports to the ASX containing
Cerro de Fierro drill results are listed at the
end of this report for reference).
A comparison with the Mina Justa deposit,
located ~150km to the north, suggests closer
spaced drilling than that originally completed
under the SAA is required to test areas with
more complex structure.
A target zone approximately 600m x 150m in
size has been identified to the north-west of
drill-hole CDFDD003 within an uplifted
block of andesitic volcanics, which does not
appear to have been effectively tested by the
original drilling program. Drill holes
CDFDD006, 009, and 014 which intersected
narrow intervals of anomalous copper are
now thought to reflect near miss situations
with the central part of the target zone only
intersected by hole CDFDD003 (Figure 9).
A limited drill program is being planned to
test this structural target, with drill permits
being sought for up to five drill sites. Permits
are expected to be granted over the coming
months.
Figure 9: Cerro de Fierro Prospect showing location of structural target and drill-hole locations
Cangallo Copper-Gold Project:
The
Cangallo
Project
is
located
approximately 20km west of the Company’s
Cerro de Fierro Project in southern Peru,
along the same E-W structures that appear to
control the emplacement of potential
porphyry copper systems in the area. The
tenements, which cover an area of ~ 30km²,
are located at an elevation of 1,600 metres,
~10km from the coast, close to infrastructure.
Geological mapping and rock-chip sampling
has identified a partially exposed copper (+/gold) porphyry system within a large-scale
(5km x 2km) caldera-like structure containing
extensive colluvial and younger sediment
cover.
During the Quarter, a drill program was
designed to test for copper mineralisation
where geological mapping and sampling has
identified potential porphyry copper targets in
areas of sub-crop and shallow cover. Highly
anomalous copper (up to 0.64% Cu),
molybdenum (up to 42ppm Mo) and scattered
gold values (up to 2.5g/t Au) within veined
and altered (sericite) volcanics and
porphyritic rocks indicate the potential for a
nearby porphyry system (see ASX release 30
March 2023).
A total of 17 drill pads and access tracks have
been designed to test beneath copper and
molybdenum anomalies identified at surface,
as well as testing areas with shallow colluvial
and sedimentary cover that are thought to hide
at least part, if not most of, the porphyry
system (Figure 10).
Drill permitting was advanced, with
environmental surveys and community
consultations completed and a report provided
to Government as part of the approval
process. It is anticipated that drill permits
should be received within the next two-tothree months.
Additional titles were acquired during the
Quarter to ensure the Company has coverage
over priority target areas associated with this
partially exposed porphyry copper system.
Figure 10: Cangallo Porphyry Prospect showing anomalous Cu and Mo values and planned drill sites
Parcoy IOCG Project:
The Parcoy Project is located near the
southern end of a recognised IOCG
metallogenic belt in southern Peru. It lies
within ~100km of the Mina Justa deposit
(~475Mt @ 0.68% Cu), and ~50km northwest of the Company’s Cerro de Fierro
Project. Geological mapping and rock-chip
sampling
has
identified
significant
concentrations of copper (+/- gold) at
surface, reflecting potential manto-style
mineralisation
within
the
volcanic
stratigraphy.
During the Quarter, track access and drill pads
from the earlier drill programs were
rehabilitated and a report prepared for
Government. Compilation and review of
drilling and surface data is in progress ahead
of the Company seeking expressions of
interest from other parties who may be
interested in pursuing this opportunity.
The Company believes there are porphyry
copper targets at Parcoy that were not tested
by the initial wide-spaced drilling programs,
which provided evidence of nearby porphyry
system(s) based on interpretation of the
geochemical data.
Tenements were rationalised to retain the high
priority target areas.
Los Otros Porphyry Copper Project:
The Los Otros Project is located close to the
Palaeocene Porphyry Copper Belt of southern
Peru, which is the major copper producing
region in the country. It lies within 35km of
the Cuajone mine (~1.6Bt @ 0.6% Cu), and
40km from the Quellaveco deposit (~1.3Bt @
0.57% Cu) currently being developed by
Anglo American.
No exploration work was completed at Los
Otros during the Quarter. Following a review
of data over this project it was decided not to
renew the tenements.
payments of $54,750, and payments of
$12,000 for corporate consulting fees to a
director.
The Company advises its appeal to the
Administrative Judiciary against payments
requested by the Ministry of Housing (SBN)
for temporary access to State-Owned land for
drilling purposes, is still with the Supreme
Court of Peru for leave to appeal on the
question of interpretation of the relevant law.
The Company continues to monitor the
position and will keep shareholders advised of
any significant developments.
KEY ACTIVITIES – SEPTEMBER 2023
QUARTER
•
New Opportunities (Peru)
•
Selected tenements at the Playa Kali, El Toro,
El Sello and Ventura Projects were not
renewed at the end of the Quarter to reduce
costs and to ensure all priority copper targets
remained under the Company’s title.
Systematic rock-chip sampling at the
Ventura Project, east of Ilo, is planned to
upgrade a coherent copper-in-soil anomaly
that appears to be associated with stock-work
veined volcanics and intrusive rocks in the
southern coastal area east of the port of Ilo.
This work will be undertaken when priorities
allow.
CORPORATE
During the June Quarter, the Company
invested $2,236,000 in exploration and had
approximately $3.7 million in cash remaining
at the end of June. Further funding from
South32 to cover agreed work programs over
Strategic Alliance Projects is expected in Q3
2023.
The Company’s Cashflow Report (Appendix
5B) for the quarter ended 30 June 2023 is
appended to this report. Payments to related
parties as shown in Section 6 of this report
include director salary and superannuation
•
•
•
•
•
•
Balladonia (Cu-Au-Ni) – Compile and
assess assay and geological data
obtained from the recent drilling and
plan future exploration programs.
Morrisey (Magnetite, Ni-Cu-PGE) –
Complete assessment of geophysical
modelling and obtain clearances for
drilling of key target(s) for magnetite.
Morrisey (Li) – Field checking and
infill soil sampling of potential lithium
targets.
Jubilee
Lake
(Ni-Cu-PGE)
–
Commence drilling to test the deep
EM target for Ni-Cu mineralisation
within West Officer Basin sediments.
Moora (Ni-Cu-PGE) – Plan sampling
and/or drilling to test key target areas
outlined by the modelling of
magnetic/gravity data.
Peru (Cu-Mo-Au) – Complete drill
permitting for the Cangallo and Cerro
de Fierro Copper Prospects.
Peru (Cu-Mo-Au) – Seek new joint
venture partners to help fund ongoing
exploration
activities
(including
drilling) at key prospects.
Peru (Cu Mo-Au) – Detailed mapping
and trenching of critical areas at
Target 7 (Pirata) to optimise planning
for drilling.
Authorised for release on behalf of the
Company by:
Graeme Drew
Managing Director
COMPETENT PERSON’S STATEMENT
The details contained in this report that pertain to exploration results are based upon information compiled by Mr Graeme Drew, a
full-time employee of AusQuest Limited. Mr Drew is a Fellow of the Australasian Institute of Mining and Metallurgy (AUSIMM)
and has sufficient experience in the activity which he is undertaking to qualify as a Competent Person as defined in the December
2012 edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (JORC Code).
Mr Drew consents to the inclusion in the report of the matters based upon his information in the form and context in which it
appears.
FORWARD LOOKING STATEMENT
This report contains forward looking statements concerning the projects owned by AusQuest Limited. Statements concerning
mining reserves and resources may also be deemed to be forward looking statements in that they involve estimates based on
specific assumptions. Forward-looking statements are not statements of historical fact and actual events and results may differ
materially from those described in the forward looking statements as a result of a variety of risks, uncertainties and other factors.
Forward looking statements are based on management’s beliefs, opinions and estimates as of the dates the forward looking
statements are made and no obligation is assumed to update forward looking statements if these beliefs, opinions and estimates
should change or to reflect other future developments.
*Announcements to ASX re historic Cerro de Fierro drill results:
29/11/2018 – Copper-Gold Intersected at Cerro de Fierro
19/12/2018 – Additional Copper-Gold Intersections at Cerro de Fierro
08/04/2019 – Potential Copper Extensions at Cerro de Fierro
09/01/2020 – Drilling Update – Cerro de Fierro
10/01/2020 – Clarification of Drilling Update – Cerro de Fierro
05/03/2020 – Drilling Progress at Cerro de Fierro
15/02/2021 – Drilling Commences in Peru
29/03/2021 – Copper Potential Grows in Peru
27/04/2021 – Copper Potential Outlined at Cerro de Fierro
JORC Code, 2012 Edition – Table 1 Report Soil Sampling – Morrisey Project
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc). These examples should not be taken as limiting the broad
meaning of sampling.
• Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
• Aspects of the determination of mineralisation that are Material to the Public
Report.
• In cases where ‘industry standard’ work has been done this would be relatively
simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from
which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where there is coarse gold
that has inherent sampling problems. Unusual commodities or mineralisation
types (eg submarine nodules) may warrant disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth
of diamond tails, face-sampling bit or other type, whether core is oriented and if
so, by what method, etc).
• Method of recording and assessing core and chip sample recoveries and results
assessed.
• Measures taken to maximise sample recovery and ensure representative nature
of the samples.
• Whether a relationship exists between sample recovery and grade and whether
sample b
Share your feedback
Discover