Quarterly Activities and Cashflow Report
Released
Released
Announcement PDF
Visit Investor Hub for a video update
September 2024 Quarterly Activities Report
HIGHLIGHTS
Australia – Copper, Zinc, Nickel, Gold
Premium iron product (>70% Fe) successfully produced following receipt of Davis Tube
Recovery (DTR) results from the first three drill-holes at the Waterfall Prospect (Morrisey
Project). Magnetite recoveries averaged 40% for coarse grind sizes (106um, 75um). DTR
test results for the remaining 12 drill-holes are pending.
Drilling of further magnetic/gravity targets within the Morrisey Project area currently
being planned in consultation with a subsidiary of South32 Ltd (South32) under the
Strategic Alliance Agreement (SAA). The next phase of drilling will be designed to
determine the resource potential within the project area.
At Balladonia, target areas for Broken Hill Type (BHT) mineralisation outlined based on
results from gravity surveys completed during the Quarter. Ground electromagnetic (EM)
surveys commenced to prioritise drilling targets associated with VTEM anomalies.
Four large conductive targets defined from VTEM results over the Mt Davis Project. The
targets are located below the Frere Iron Formation, highlighting the potential for SEDEX
style base metal deposits.
Prospective targets for iron-oxide copper-gold (IOCG) mineralisation identified within the
Coober Pedy Project, located at northern end of the world-class Olympic Dam IOCG
Province.
Peru – Copper-Gold
Permits received to enable drilling to commence at the Cangallo Copper Project in
southern Peru. Drilling is planned to commence in the December / January period.
Drill permitting for the Lantana and Playa Kali copper prospects was advanced with field
environmental studies completed. The permits should be completed in early 2025,
allowing drilling to commence in H1 2025 subject to rig availability.
Corporate
A non-renounceable rights offer to the Company’s shareholders launched in October to
raise up to ~A$2.6 million (before costs) to provide funds to undertake exploration drilling
on the Company’s 100%-owned copper projects in Peru and investigate new acquisition
and/or exploration opportunities in Australia. The rights offer closes on 4th November.
Quarter-end cash position of ~$0.9 million, with additional funds of $465,000 received in
October for work programs at Balladonia and Morrisey under the SAA.
Figure 1: Project Locations – Australia and Peru.
OVERVIEW
During the September Quarter, geophysical
surveys were initiated over the Mt Davis,
Balladonia and Coober Pedy Projects to help
identify targets for future drilling. Further
exploration at the Morrisey Magnetite Project
is currently in the planning stage following
encouragement from further DTR results
received during the Quarter.
In Peru, the focus remained on finalising drill
permits for three of the Company’s largescale copper projects – Cangallo (completed),
Lantana (in progress) and Playa Kali (in
progress). Drilling of these greenfields
porphyry copper and manto copper targets is
considered a priority by the Company.
AUSTRALIA – BASE METAL
PROJECTS (Copper, Zinc, Nickel & REE)
Balladonia Nickel-Copper and REE
Project (100% AQD, subject to SAA)
The Balladonia Project is located ~50km
south of the Nova–Bollinger nickel-copper
deposit. It consists of 10 Exploration Licences
(six granted and four applications) covering
an area of ~1,200km² and is located within a
structurally complex region of the Fraser
Range Terrane. Exploration at Balladonia
has indicated the potential for multiple
mineralisation styles with many potential
targets identified. This includes the potential
for nickel and copper mineralisation similar
to the Nova deposit, as well as iron-oxide
copper-gold (IOCG) and Broken Hill Type
(BHT) deposits similar to those found in the
Eastern Succession (NW Queensland) and in
NSW. More recently, the potential for rare
earth elements (REE) associated with
carbonatite intrusions has also been
recognised. Many of the tenements lie within
the Dundas Reserve. Exploration work at
Balladonia is funded under the SAA.
During the Quarter, detailed gravity coverage
along the southern extension of the Tea Tree
Trend and its surrounds was completed to
outline potential target areas for future
drilling. This area had been identified as
being highly prospective for BHT deposits
based on results from earlier drilling which
intersected alteration and host rocks similar to
those found in the Cloncurry belt in NW
Queensland and at Broken Hill in NSW (ASX
release 22 September 2023).
A total of ~1,680 gravity readings were
acquired by Atlas Geophysics on a 400m x
100m grid, with in-fill lines completed at
200m intervals where they were required to
define anomalies located by the original
survey spacing. A residual gravity image is
shown in Figure 2.
Figure 2: Balladonia Project residual gravity image and RTP magnetic image showing location of highpriority target areas for BHT base metal mineralisation.
Results from the gravity survey were
compiled with the detailed aeromagnetic data,
outlining a number of target areas that are
currently being considered under the SAA for
further drill testing. Coincident magnetic and
gravity anomalies, as well as gravity
responses coincident with the interpreted
prospective host sequence (as defined by the
presence of banded iron formations, or BIFs),
are considered to be priority targets for BHT
mineralisation.
Ground electromagnetic (EM) surveys also
commenced during the Quarter to upgrade
selected bedrock conductors that were located
by the VTEM survey completed in Q4 2023
to drill status (ASX release 11 January 2024).
A total of eight VTEM anomalies are being
tested using a moving loop transient EM
(MLTEM) system with 200m x 200m
transmitter loops and an offset fluxgate
receiver coil along survey lines spaced 200m
apart.
It is expected that results from these MLTEM
surveys will be available in the coming
weeks, once all final data have been received
and data processing completed. Initial results
suggest that the VTEM targets reflect bedrock
conductors, but computer modelling will be
undertaken to more fully assess the results
before further drill testing programs can be
designed.
Further drilling within the Balladonia Project
is expected to commence in H1 2025.
Morrisey Magnetite, Nickel-Copper-PGE
Project (100% AQD, subject to SAA)
The Morrisey Project is located ~500km north
of Perth in Western Australia within Western
Australia’s Midwest mining district. The
project occurs within the high grade
metamorphic Narryer Terrane, which forms
the north-western margin of the Yilgarn
Craton. It consists of four granted
Exploration Licences covering an area of
~1,000km² and is located ~120km north of the
town of Mullewa, where there is rail access to
(106um, 75um, and 38um), enhancing the
future commercial potential of the project
(ASX release, 8 September 2024).
the Port of Geraldton, some 80km away.
Reconnaissance drilling to test magnetic
targets intersected coarse grained magnetite
which could be upgraded via magnetic
separation methods to a premium iron
product (>70%Fe). Exploration work at
Morrisey is funded under the SAA.
A total of 16 composite samples were tested,
with no discernible difference in product
grades and magnetite recoveries between all
three grind sizes, suggesting that a coarse
grind would be adequate to separate magnetite
from the other gangue material.
During the Quarter, Davis Tube Recovery
(DTR) test work completed on samples
collected from three drill-holes (MYRC01,
04, and 07) at the Waterfall Prospect – that
were selected to optimise the sample
preparation process – successfully produced a
premium iron product grading >70% Fe, with
excellent magnetite recoveries (40%)
achieved from each grind size trialled
DTR results also showed that deleterious
elements such as silica (SiO2), alumina
(Al2O3), sulphur (S) and phosphorous (P)
were all very low in the processed product
(see Table 1).
Table 1: Davis Tube Recovery Test results for 75um grind size – drill holes MYRC01, 04, 07
75um DTR CONCENTRATE GRADES
Drill-Hole
From
(m)
To
(m)
Length
(m)
Fe %
Recovery
%
Fe %
SiO2
%
Al2O3
%
S%
P%
MYRC001
102
112
10
33.39
36.5
70.65
1.51
0.22
0.012
0.002
112
122
10
32.04
40.48
71.20
1.74
0.05
0.003
0.002
122
132
10
31.51
38.78
71.09
1.66
0.04
0.002
0.002
132
144
12
36.23
47.57
71.41
0.95
0.05
0.006
0.002
MYRC004
64
74
84
94
104
118
74
84
94
104
108
122
10
10
10
10
4
4
33.17
32.76
26.12
30.19
33.24
22.54
36.74
42.07
32.4
36.51
41.29
28.34
71.53
71.12
71.54
70.34
70.54
70.71
1.05
1.25
0.85
2.12
2.00
1.69
0.2
0.05
0.1
0.12
0.09
0.19
0.014
0.002
0.008
0.006
0.004
0.002
0.002
0.002
0.001
0.003
0.002
0.002
MYRC007
100
110
120
130
140
150
110
120
130
140
150
156
10
10
10
10
10
6
33.18
31.94
32.15
31.57
35.37
39.25
39.02
39.74
38.73
41.31
47.63
52.47
71.08
71.47
70.51
70.68
70.69
71.98
1.33
1.19
1.91
1.80
1.57
0.5
0.16
0.12
0.13
0.06
0.05
0.06
0.015
0.002
0.002
0.002
0.004
0.004
0.002
0.002
0.003
0.003
0.003
0.002
DTR results for the remaining composite
samples (~84) from the recent drilling
program (Figure 3) are expected in November
and will be used to determine variations in
recovery, product grade and deleterious
element content across the prospect, before
next steps are decided under the SAA.
Figure 3. Waterfall Prospect: Gravity image showing the location of RC drill-holes and significant Fe
assays as reported to ASX on June12 2024). Drill-holes used for trial DTR test work are highlighted.
Moora Nickel-Copper Project (100% AQD,
subject to SAA)
The Moora Project is located ~150km north
of Perth, Western Australia, within the
Jimperding Metamorphic Belt, which forms
the south-western margin to the Yilgarn
Craton. It consists of two Exploration
Licences and covers an area of ~370km². The
area became the focus of industry attention
following the discovery of the Julimar nickelcopper-PGE deposit north of Perth, which
highlighted the untested nickel-copper-PGE
potential of the Western Yilgarn Craton
margin. Exploration work at Moora is funded
under the SAA.
strongly magnetic, suggesting that similar
magnetic ultramafic rocks within the Latham
Intrusion would be priority targets for nickelcopper-PGE mineralisation.
Reverse Circulation (RC) drilling (two
holes/~500m) is planned to commence in
December 2024 once the crops have been
harvested. This drilling will test for the
presence of magnetic ultramafic rocks
beneath the gabbro that was intersected by the
initial drill program.
Mt Davis Lead-Zinc-Copper Project (100%
AQD)
The Mt Davis Project is located ~180km NNE
of Wiluna, Western Australia, along the
northern margin of the Earaheedy Basin. It
consists of one Exploration Licence covering
an area of ~380km². The project was acquired
following the discovery of extensive zinc and
copper mineralisation by Rumble Resources
at its Chinook Prospect, located on the
southern side of the Basin, where
mineralisation is stratigraphically controlled
and located below the Frere Iron Formation.
The Mt Davis tenements are believed to
contain similar stratigraphy but in an area of
greater structural complexity which has been
reported as an important factor in the
localisation of higher grades at Chinook.
Fertile ultramafic host rocks at the Julimar
deposit, north of Perth, are known to be
During the Quarter, a VTEM Max survey was
completed to locate possible base metal
mineralisation within or below the Frere Iron
Formation in a similar stratigraphic position
to the lead-zinc-copper mineralisation
discovered by Rumble Resources at the
Chinook Prospect, on the southern side of the
Basin.
A total of 1,060-line kilometres of VTEM
were surveyed along north-south flight lines,
at 200m line spacing. The survey was partly
funded (50%) by the WA Government’s “Co-
Funded Geophysics Program” (ASX release,
17 September 2024).
Four large conductive targets were outlined
by the survey (Figure 4). Computer modelling
suggests that these targets are caused by large,
shallow dipping (10° to 15°) bodies with low
to moderate conductivities that reflect higher
sulphide and/or carbonaceous content within
stratigraphic conductors located within or
below the Frere Iron Formation.
Figure 4: Late-time VTEM image (top) and Magnetic 1VD image (bottom) showing VTEM targets
stratigraphically below the inferred Frere Iron Formation and structures
Detailed aeromagnetic data indicates that the
area is structurally complex, with major crosscutting faults and folding of the iron
formation evident in the data.
The Mt Davis Project is thought to reflect a
structural window (an upthrust block) into the
deeper parts of the Earaheedy Basin, where
the potential for SEDEX Cu-Pb-Zn deposits
associated with a basin-wide mineralising
event is considered most likely to occur.
Ground follow-up including surface and rockchip sampling over one of the key target areas
was completed in October – with assays
pending. The remaining targets are under
extensive sand cover.
Coober Pedy Copper-Gold Project (100%
AQD)
The Coober Pedy Project is located ~15km
SW of the town of Coober Pedy, South
Australia, on the north-eastern margin of the
Gawler Craton, approximately 100km NW of
the Prominent Hill Copper Gold deposit. The
Project, which consists of one Exploration
Licence covering an area of ~170km², was
acquired to explore for iron-oxide copper-
gold (IOCG) deposits. Regional magnetic and
gravity data, plus analytical results from
historic drilling (five holes) highlighted the
prospectivity of the area.
During the Quarter, a detailed gravity survey
(717 stations on a 400m x 100m grid with
selected in-fill lines at 200m) was completed
over a regional gravity anomaly that appeared
to be related to two historic drill-holes that
contain potassic alteration, suggesting
proximity to IOCG-style mineralisation (ASX
release, 21 October 2024).
Residual gravity data shows at least two areas
within the broader gravity response (~5km x
2km), where higher gravity values (more
dense rocks) are closely associated with the
historic drill-holes (Figure 5).
Figure 5: Residual Gravity Image showing location of gravity stations and historic drill-holes (Vale 2015)
containing potassic alteration
Correlation with available aeromagnetic data
indicates that the higher gravity responses are
offset from the stronger magnetic anomalies,
suggesting the possibility of hematite rather
than magnetite as a possible cause for the
higher gravity.
The close association of hematite and
magnetite with IOCG mineralisation is well
known in the IOCG Province of South
Australia, which hosts the world-class
deposits of Olympic Dam, Carrapateena and
Prominent Hill, and is the main reason why
magnetic and gravity surveys are commonly
used to identify targets for drilling in these
areas.
Further exploration programs are currently
being designed and will be discussed with
South32 under the SAA.
Hamilton Copper-Gold Project (100%
AQD)
The Hamilton Project is located in north-west
Queensland, ~120km south of the world-class
Cannington mine and ~70km south of the
Osborne copper mine. It consists of two
Exploration Licences covering an area of
~260km². Exploration is targeting iron oxide,
copper, gold (IOCG) and Broken Hill Type
(BHT) mineralisation beneath the extensive
cover in the region. Limited drilling
completed to date to test magnetic and gravity
targets, provides evidence for “near-miss”
situations which are the focus of the
Company’s exploration.
During the Quarter, the Exploration Licences
were successfully renewed for a further twoyear period. Strong potassic, calcic and iron
alteration intersected by several of the
Company’s earlier drill-holes is thought to
reflect proximity to mineralisation beneath the
Eromanga Basin sediments that has not been
fully tested.
A proposal to further drill test magnetic and
gravity targets identified at the Hamilton
South prospect is now being considered.
Jubilee Lake Nickel-Copper-PGE Project
(100% AQD, subject to SAA)
The Jubilee Lake Project is located ~500km
east of Kalgoorlie in Western Australia,
within the northern portion of the Eucla
Basin. It consists of three granted Exploration
Licences covering a total area of ~1,800km².
The Project is situated within a large flood
basalt terrane close to the south-eastern
margin of the Yilgarn Craton and is centred
over the Rodona Shear, which shows strong
evidence as being a key feeder structure to the
surrounding flood basalts. Mafic/ultramafic
intrusions associated with feeder structures to
flood basalt terranes are considered prime
targets for Ni-Cu-PGE sulphide deposits,
similar to those found at the giant Norilsk
deposits in Russia, and more locally at NeboBabel (Oz Minerals) and possibly at NovaBollinger (IGO). Exploration work at Jubilee
is funded under the SAA.
Further field work at this project is pending
advice from Central Desert Native Title
Services and the Traditional Owners
regarding proposed heritage clearance surveys
for drilling designed to test the Company’s
concept of a new nickel-copper province.
New Opportunities (Australia):
New opportunities within Australia continue
to be assessed by the Company’s consultants.
PERU COPPER-GOLD PROJECTS
AusQuest has assembled a strong portfolio of
copper-gold prospects along the southern
coastal belt of Peru in South America, with
numerous targets identified for drilling as
possible porphyry copper and/or replacement
style (manto) IOCG targets with the size
potential being of significance to AusQuest
(Figure 6). Peru is one of the world’s most
prominent destinations for copper exploration
and is considered a prime location for worldclass exploration opportunities.
During the Quarter, the search for new joint
venture partners for the Company’s copper
projects in southern Peru continued, with a
number of companies still to decide on their
level of interest.
The Company is now finalising drill permits
over three of its prospects with a plan to drill
test selected porphyry and manto copper
targets as part of its ongoing exploration
activities in Peru.
Figure 6: Project Locations – Southern Peru.
Cerro de Fierro Copper Project (100%
AQD)
The Cerro de Fierro Project (CDF) is located
at the southern end of a recognised IOCG
metallogenic belt in southern Peru. It lies
within ~150km of the Mina Justa deposit
(~475Mt @ 0.68% Cu), which is being
developed by the Marcobre Joint Venture.
Surface indicators of porphyry copper
mineralisation have been identified within the
Pirata Project area approximately 5km due
east of CDF, associated with a major E-W
structure that is considered to be a priority
target zone for porphyry copper deposits
within the coastal belt of southern Peru.
During the Quarter, environmental studies
over 20 drill pad sites and access preparations
were completed at the Lantana prospect as
part of the drill permitting process.
Community consultations have been initiated
and are expected to be concluded before the
end of the year. Government approvals to
allow drilling to commence are estimated to
take a further 2-3 months, with drilling
possible within H1 2025.
The Lantana prospect is considered to be a
high-priority porphyry copper target due to its
scale (~2,000m x 800m) and the widespread
occurrence of highly anomalous copper,
molybdenum and bismuth values obtained
from systematic rock-chip sampling programs
completed in 2023 (see Quarterly Report,
March 2023).
Cangallo Copper-Gold Project (100%
AQD)
The
Cangallo
Project
is
located
approximately 20km west of the Company’s
Cerro de Fierro Project in southern Peru,
along the same E-W structures that appear to
control the emplacement of potential
porphyry copper systems in the area. The
tenements, which cover an area of ~ 30km²,
are located at an elevation of 1,600 metres,
~10km from the coast, close to infrastructure.
Geological mapping and rock-chip sampling
has identified a partially exposed copper (+/gold) porphyry system within a large-scale
(5km x 2km) caldera-like structure containing
extensive colluvial and younger sediment
cover.
During the Quarter, planning for access
preparations was initiated with earth moving
contractors visiting site to enable final
estimates for access and drill pad preparation
to be provided. Drilling contractors were also
contacted to determine RC drill rig
availability and costings.
Figure 7: Cangallo Prospect showing geological mapping, surface copper values and drill pads.
The initial drilling program (minimum ~8
holes for ~2,500m) will test areas with
relatively intense veining (quartz) and
porphyritic dykes, where higher copper values
(up to 0.65% Cu) have been found. The
possibility of a buried porphyry copper
system beneath the extensive cover within the
interpreted caldera-like structure will also be
tested (Figure 7).
and gold values) was located within a
sequence of sediments similar to those found
in the vicinity of the Marcona and Mina Justa
deposits to the north. Geological mapping,
rock-chip sampling and ground magnetic
surveys have been completed over the
tenements, defining target areas for further
exploration targeting manto-style copper-gold
deposits.
Current plans are for drilling to commence in
December 2024, subject to drill rig
availability.
During the Quarter, further mapping and
sampling identified additional manto (Fe)
outcrops within narrow valleys extending
inland from the coast, where rocks underlying
the cover sequence are exposed, providing
further evidence for extensive manto
development in the area.
Playa Kali IOCG Project (100% AQD)
The Playa Kali Project is located ~30km east
of the town of Chala and ~120km east of the
Mina Justa copper deposit (~475Mt @ 0.68%
Cu). It consists of four mineral claims
covering an area of ~40km² and was acquired
after manto-style mineralisation (including
massive magnetite layers with patchy copper
Modelling of ground magnetic data outlined a
number of targets beneath cover, that are
considered priority targets for manto-style
copper (and potentially gold) mineralisation.
A drilling program was designed to test a
selection of these targets and the drill
permitting process commenced to enable
targets to be tested in the shortest possible
time frame (Figure 8).
Figure 8: Playa Kali Prospect showing magnetic modelling, priority targets and planned drill pads
Environmental studies and community
consultations were initiated and are expected
to be completed before the end of the year.
Final Government approvals for drilling
should be available during Q1 2025, with
drilling possible in H1 2025 subject to drill
rig availability.
The Company believes that there are copper
targets at Parcoy that were not tested by the
initial wide-spaced drilling programs and is
seeking a joint venture partner to progress this
project.
Parcoy IOCG Project (100% AQD)
The Parcoy Project is located near the
southern end of a recognised IOCG
metallogenic belt in southern Peru. It lies
within ~100km of the Mina Justa deposit
(~475Mt @ 0.68% Cu), and ~50km northwest of the Company’s Cerro de Fierro
Project. Geological mapping and rock-chip
sampling
has
identified
significant
concentrations of copper (+/- gold) at
surface, reflecting potential manto-style
mineralisation
within
the
volcanic
stratigraphy.
The search for new copper opportunities has
been put on hold while the Company seeks
suitable partners for its current projects and
progressing drill testing of the projects
outlined above.
New Opportunities (Peru)
CORPORATE
At the end of the September Quarter, the
Company had approximately $0.92 million in
cash after investing $1.03 million in
exploration. In early October, the Company
received additional funds of $465,000
(excluding GST) from South32 to cover work
programs agreed under the SAA.
The Company’s Cashflow Report (Appendix
5B) for the Quarter ended 30 September 2024
is appended to this report. Payments to related
parties as shown in Section 6 of this report
include director salary and superannuation
payments of $54,750, and payments of
$12,000 for corporate consulting fees to a
director.
The Company advises that its appeal to the
Administrative Judiciary against payments
requested by the Ministry of Housing (SBN)
for temporary access to State-Owned land for
drilling purposes, is still with the Supreme
Court of Peru for leave to appeal on the
question of interpretation of the relevant law.
The Company continues to monitor the
position and will keep shareholders advised of
any significant developments.
KEY ACTIVITIES – DECEMBER 2024
QUARTER
Balladonia
(Cu-Au-Ni-REE)
–
Complete Ground EM surveys and
initiate access approvals for planned
drilling under the SAA.
Morrisey (Magnetite, Ni-Cu-PGE) –
Complete assessment of the Waterfall
DTR results and access approvals for
further drilling under the SAA.
Moora (Ni-Cu-PGE) – Complete RC
drilling to test for Ni-Cu-PGE fertility
at Latham.
Jubilee
Lake
(Ni-Cu-PGE)
–
Determine possibility of heritage
clearance for drilling.
Mt Davis (Cu-Pb-Zn) – Assess EM
and sampling results and present to
South32 under SAA.
Coober Pedy (Cu-Au) – Design drill
program to test gravity/magnetic
targets and present to South32 under
the SAA.
Peru
(Cu-Mo-Au) –
Continue
discussions with potential joint
venture parties over selected projects.
Peru (Cu-Mo-Au) – Commence
drilling at the Cangallo Porphyry
Copper Prospect.
Peru (Cu-Mo-Au) – Continue drill
permitting for the Lantana and Playa
Kali copper prospects
Authorised for release on behalf of the Company by:
Graeme Drew
Managing Director
Visit Investor Hub for further updates
COMPETENT PERSON’S STATEMENT
The details contained in this report that pertain to exploration results are based upon information compiled by Mr Graeme Drew, a
full-time employee of AusQuest Limited. Mr Drew is a Fellow of the Australasian Institute of Mining and Metallurgy (AUSIMM)
and has sufficient experience in the activity which he is undertaking to qualify as a Competent Person as defined in the December
2012 edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (JORC Code).
Mr Drew consents to the inclusion in the report of the matters based upon his information in the form and context in which it
appears.
FORWARD LOOKING STATEMENT
This report contains forward looking statements concerning the projects owned by AusQuest Limited. Statements concerning
mining reserves and resources may also be deemed to be forward looking statements in that they involve estimates based on
specific assumptions. Forward-looking statements are not statements of historical fact and actual events and results may differ
materially from those described in the forward looking statements as a result of a variety of risks, uncertainties and other factors.
Forward looking statements are based on management’s beliefs, opinions and estimates as of the dates the forward looking
statements are made and no obligation is assumed to update forward looking statements if these beliefs, opinions and estimates
should change or to reflect other future developments.
JORC Code, 2012 Edition – Table 1 report, Balladonia Gravity Survey Results
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
• Aspects of the determination of mineralisation that are Material to the Public
Report.
• In cases where ‘industry standard’ work has been done this would be relatively
simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from which
3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is coarse gold that has inherent
sampling problems. Unusual commodities or mineralisation types (eg submarine
nodules) may warrant disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other type, whether core is oriented and if so, by
what method, etc).
• Method of recording and assessing core and chip sample recoveries and results
assessed.
• Measures taken to maximise sample recovery and ensure representative nature of
the samples.
• Whether a relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of fine/coarse material.
• Whether core and chip samples have been geologically and geotechnically logged
to a level of detail to support appropriate Mineral Resource estimation, mining
studies and metallurgical studies.
• Whether logging is qualitative or quantitative in nature. Core (or costean, channel,
etc) photography.
• The total length and percentage of the relevant intersections logged.
• If core, whether cut or sawn and whether quarter, half or all core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet
• A gravity survey using a Scintrex CG-5 and CG-6 Autograv
gravity meters and Garmin autonomous GPS receivers for
navigation and recording X, Y and Z coordinates at each
station. Line spacings of either 200m or 400m were used with
readings taken every 100m along the lines.
Drilling techniques
Drill sample
recovery
Logging
Sub-sampling
techniques and
1
• Not applicable
• Not applicable
•
Share your feedback
Discover