Potential Ni-Cu-PGE Host Rocks at Moora
Released
Released
Announcement PDF
November 20th, 2023
POTENTIAL NICKEL-COPPER-PGE HOST ROCKS HIGHLIGHTED AT
MOORA, WA
AusQuest Limited (ASX: AQD) is pleased to advise that it has identified potential for
prospective host rocks (ultramafics) for nickel-copper-PGE mineralisation at the Moora
Nickel-Copper-PGE Project in WA.
Results from recent soil sampling across the Latham Intrusion have highlighted several areas
around the margins of the interpreted layered intrusion where ultramafic rocks are most likely
to occur, based on interpretation of trace element geochemistry within the soils, using
chrome to titanium and other trace element ratios (Figure 1).
A total of 151 samples were collected at 100 metre intervals along fence-lines and tracks (to
avoid impacting cropped areas) and analysed for 48 elements using low level detection
methodologies. Priority target areas for ultramafic rocks occur around the eastern and northwestern contacts of the intrusion. No anomalous nickel or copper values were reported.
Figure 1: Shows the areas where ultramafic signatures in soils have been identified and their
association with magnetics, gravity, and earlier drilling. The main areas containing potential ultramafic
rocks occur marginal to the strongest magnetics and along the intrusion’s eastern contact where
possible feeder dykes may occur.
These results support the conclusions reached from modelling of the aeromagnetic data and
interpretation of earlier Reverse Circulation drilling results which suggested that strongly
magnetic ultramafic rocks should occur within the Latham Intrusion, most likely below the
ferro-gabbro unit intersected by the initial drilling program (ASX release 24 April 2023, and
June 2023 Quarterly Report).
The fertile ultramafic host rocks that contain nickel-copper-PGE mineralisation within the
Gonneville Intrusion at the Julimar Prospect, north of Perth, are known to be strongly
magnetic, suggesting that similar magnetic units at Latham should be high-priority targets for
nickel-copper-PGE mineralisation.
AusQuest’s Managing Director, Graeme Drew, said the latest soil results have re-affirmed
that potential ultramafic host rocks for Ni-Cu-PGE mineralisation are highly likely to be
present within the Latham Intrusion.
“Whether they contain Ni-Cu-PGE sulphides or not will be the subject of ongoing exploration,
which is currently being considered under the Strategic Alliance Agreement with a whollyowned subsidiary of South32,” he said.
Graeme Drew
Managing Director
COMPETENT PERSON’S STATEMENT
The details contained in this report that pertain to exploration results are based upon information compiled by Mr
Graeme Drew, a full-time employee of AusQuest Limited. Mr Drew is a Fellow of the Australasian Institute of
Mining and Metallurgy (AUSIMM) and has sufficient experience in the activity which he is undertaking to qualify as
a Competent Person as defined in the December 2012 edition of the “Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves” (JORC Code). Mr Drew consents to the inclusion in
the report of the matters based upon his information in the form and context in which it appears.
FORWARD LOOKING STATEMENT
This report contains forward looking statements concerning the projects owned by AusQuest Limited. Statements
concerning mining reserves and resources may also be deemed to be forward looking statements in that they
involve estimates based on specific assumptions. Forward-looking statements are not statements of historical fact
and actual events and results may differ materially from those described in the forward looking statements as a
result of a variety of risks, uncertainties and other factors. Forward looking statements are based on
management’s beliefs, opinions and estimates as of the dates the forward looking statements are made and no
obligation is assumed to update forward looking statements if these beliefs, opinions and estimates should
change or to reflect other future developments.
2
JORC Code, 2012 Edition – Table 1 Report Soil Sampling – Moora Nickel-Copper
Project
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc). These examples should not be taken as limiting the broad
meaning of sampling.
• Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
• Aspects of the determination of mineralisation that are Material to the Public
Report.
• In cases where ‘industry standard’ work has been done this would be relatively
simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from
which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where there is coarse gold
that has inherent sampling problems. Unusual commodities or mineralisation
types (eg submarine nodules) may warrant disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth
of diamond tails, face-sampling bit or other type, whether core is oriented and if
so, by what method, etc).
• Method of recording and assessing core and chip sample recoveries and results
assessed.
• Measures taken to maximise sample recovery and ensure representative nature
of the samples.
• Whether a relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of fine/coarse
material.
• Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
• Whether logging is qualitative or quantitative in nature. Core (or costean,
• Reconnaissance track and fenceline soil sampling
was completed along 7 lines located 4.5 kilometres
SW of Latham in the WA wheatbelt.
• Sample were collected at 100m intervals along each
line for a total of 151 samples.
• Sample locations were recorded by hand-held GPS.
• Soil sampling sites were logged by the sampler and
recorded on a sampling spread sheet.
• Each soil sample was collected by digging a 10 to 30
cm deep hole and screening the material to pass a
2mm sieve.
• Approximately 200g of material was collected in a
numbered kraft packet.
Drilling techniques
Drill sample
recovery
Logging
1
• No drilling undertaken
• No drilling undertaken
• No drilling undertaken
Criteria
Sub-sampling
techniques and
sample preparation
Quality of assay
data and
laboratory tests
JORC Code explanation
Commentary
channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
• If core, whether cut or sawn and whether quarter, half or all core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled
wet or dry.
• For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for all sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to the grain size of the material being
sampled.
• The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make and
model, reading times, calibrations factors applied and their derivation, etc.
• Nature of quality control procedures adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether acceptable levels of accuracy (ie lack of
bias) and precision have been established.
• No sub-sampling was completed
• The samples were submitted to Intertek Genalysis
Maddington, WA, for 48 element suite 4A/MS48
• Samples were subjected to a multi-acid digest,
including Hydrofluoric, Nitric, Perchloric and
Hydrochloric acids, in teflon tubes providing close to
a total digest for most elements.
• Samples were analysed (48 elements) by Inductively
Coupled Plasma Mass Spectrometry.
• No standards or duplicates were supplied, QA/QC
provided by laboratory processes, batch assays
checked by ioGas processing of data.
Verification of
sampling and
assaying
• The verification of significant intersections by either independent or alternative
company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data verification, data
storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Field sample locations were compiled onto Excel
spreadsheets for merging with assay data.
• Assays are as reported by the laboratory and stored
in the company’s database and have not been
adjusted in any way.
• Digital data is regularly backed-up on the company’s
servers.
Location of data
points
• Accuracy and quality of surveys used to locate drill holes (collar and down-hole
surveys), trenches, mine workings and other locations used in Mineral Resource
estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Sample locations are established with a handheld
GPS to +/- 5m accuracy.
• All coordinates are expressed in GDA94 datum,
Zone 50.
2
Criteria
JORC Code explanation
Commentary
Data spacing and
distribution
• Sample were collected at 100m intervals along each
line.
• Sample spacing is appropriate for early stage level
of exploration.
Sample security
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the degree of
geological and grade continuity appropriate for the Mineral Resource and Ore
Reserve estimation procedure(s) and classifications applied.
• Whether sample compositing has been applied.
• Whether the orientation of sampling achieves unbiased sampling of possible
structures and the extent to which this is known, considering the deposit type.
• If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias, this
should be assessed and reported if material.
• The measures taken to ensure sample security.
Audits or reviews
• The results of any audits or reviews of sampling techniques and data.
• No audits or reviews have been carried out on the
sampling to date.
Orientation of data
in relation to
geological
structure
• Sample lines followed fence lines and tracks and
were oriented north-south, east-west and northeastsouthwest as a result.
• Samples were securely sealed in the field, followed
by packing into larger sealed plastic bags or boxes
for transport by AusQuest personnel to the assay
laboratory.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral tenement
and land tenure
status
• Type, reference name/number, location and ownership including agreements or
material issues with third parties such as joint ventures, partnerships, overriding
royalties, native title interests, historical sites, wilderness or national park and
environmental settings.
• The security of the tenure held at the time of reporting along with any known
impediments to obtaining a licence to operate in the area.
• The Moora Project is located northwest of
Dalwallinu, approximately 240 km north-east of
Perth in Western Australia.
• Tenement holdings include Exploration Licences
E70/5388, E70/5389 and E70/5401, all 100% held
by AusQuest Limited.
• Access agreements are in place, or in the process of
being negotiated where necessary.
• Aboriginal heritage surveys will be completed where
required ahead of ground disturbing activities.
Exploration done
by other parties
• Acknowledgment and appraisal of exploration by other parties.
• Previous exploration is very limited and was mainly
focused on bauxite and BIF associated magnetite
iron ore.
• Limited aircore, RC drilling and surface sampling
3
Criteria
JORC Code explanation
Commentary
was reported, targeting magnetic anomalies as
possible iron ore deposits.
• DetaiIed aeromagnetic data were available over the
northern half of EL 70/7389,5401, 5402 and the
extreme western part of EL 70/5388 as part of the
search for iron ore. These data are being used in the
current exploration of the area.
Geology
• Deposit type, geological setting and style of mineralisation.
• The Moora Project is targeting nickel-copper-PGE
mineralisation in mafic/ultramafic intrusions within
the extreme western part of the Yilgarn Craton.
Drill hole
Information
• A summary of all information material to the understanding of the exploration
results including a tabulation of the following information for all Material drill
holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in metres) of the
drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on the basis that the information is
not Material and this exclusion does not detract from the understanding of the
report, the Competent Person should clearly explain why this is the case.
• In reporting Exploration Results, weighting averaging techniques, maximum
and/or minimum grade truncations (eg cutting of high grades) and cut-off grades
are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths of high grade results and
longer lengths of low grade results, the procedure used for such aggregation
should be stated and some typical examples of such aggregations should be
shown in detail.
• The assumptions used for any reporting of metal equivalent values should be
clearly stated.
• These relationships are particularly important in the reporting of Exploration
Results.
• If the geometry of the mineralisation with respect to the drill hole angle is known,
its nature should be reported.
• If it is not known and only the down hole lengths are reported, there should be a
clear statement to this effect (eg ‘down hole length, true width not known’).
• No drilling undertaken
Data aggregation
methods
Relationship
between
mineralisation
widths and
intercept lengths
4
• No drilling undertaken
• No drilling undertaken
Criteria
JORC Code explanation
Commentary
Diagrams
• Appropriate maps and sections (with scales) and tabulations of intercepts should
be included for any significant discovery being reported These should include,
but not be limited to a plan view of drill hole collar locations and appropriate
sectional views.
• Where comprehensive reporting of all Exploration Results is not practicable,
representative reporting of both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration Results.
• Project and sample location diagrams have been
included in the body of the ASX release.
• Other exploration data, if meaningful and material, should be reported including
(but not limited to): geological observations; geophysical survey results;
geochemical survey results; bulk samples – size and method of treatment;
metallurgical test results; bulk density, groundwater, geotechnical and rock
characteristics; potential deleterious or contaminating substances.
• The nature and scale of planned further work (eg tests for lateral extensions or
depth extensions or large-scale step-out drilling).
• Diagrams clearly highlighting the areas of possible extensions, including the
main geological interpretations and future drilling areas, provided this information
is not commercially sensitive.
• The area was selected for sampling based on
geological and geophysical data interpretations by
the company.
Balanced reporting
Other substantive
exploration data
Further work
5
• The regional soil assay data have been used to
identify lithochemical trends and rock types.
• No anomalous base metal values were reported
from this sampling program.
• Further work will be planned once a more complete
analysis of the data is completed.
Share your feedback
Discover